Product Guides- Microsoft research projects to improve our lives
- Outlook '09
- IBM employees buzzing about layoff rumors
- AT&T builds $23M IPv6 network for U.S. military
- Is VoIP dead?
| Clear Choice Test VoIP analysis tools | ||||||||
|
||||||||
Vendors were asked to supply their VoIP analysis and management product on the hardware platform of their choice for hands-on analysis in Miercom's testing lab in New Jersey.
The test network consisted of two LAN segments with Cisco Catalyst 3750 10/100/1000 switches. The LANs were interconnected via simulated WAN link with T-1 and DS-3 links. The WAN simulation was provided by PacketStorm Communications' 1800E WAN emulation product.
VoIP calls were generated between the two LAN segments using a WinSIP call generator and snom SIP phones. Our test bed was calibrated using third-party Perceptual Evaluation of Speech Quality instrumentation.
During testing, a mix of calls with G.711 and G.729 codecs was placed between LAN segments. The products were expected to identify the number of calls and discern as much detail as they could about each individual call via a port configured for monitoring the uplink connection to the WAN. Latency, packet loss and jitter were then introduced, and the products again were given the task of properly measuring the impairments. We expected that the products would be able to discern the one voice call that was impaired and identify any other problems with the VoIP communications.
We tested the tools' ability to detect and troubleshoot two dozen converged network problems. The tests were detecting overall network impairments causing jitter, latency and packet loss both at call-setup time and while calls were in progress; slow SIP server response; duplicate addresses for registration and proxy servers; unresponsive SIP registrar and proxy; Real-time Transport Control Protocol misconfiguration; excessive echo and malformed SIP call-setup messages.
When testing was complete, the products were required to produce automated reports based on the calls and other activities that transpired during the testing. We evaluated these reports' accuracy, clarity and completeness. Real-time monitoring and alerts about the specific anomalies induced during testing were noted while testing was in progress.
Rss FeedRss Feed
| NetworkWorld, Inc. | About Network World, Inc. | Advertise | Careers | Contact us | Terms of Service/Privacy | Reprints and links | Partnerships | Press room | Subscribe to NW |
| IDG, Inc. | CIO | Computerworld | CSO | Demo | GamePro | Games.net | IDGconnect.com | IDG World Expo | Infoworld | JavaWorld.com | LinuxWorld.com | MacUser | Macworld | PC World | Playlistmag.com | The Industry Standard | IDG List Services | IDG TechNetwork |
 The Leader in Network Knowledge© 1994-2009 Network World, Inc. All rights reserved. |
Partner Content
The Foundry Enterprise Advantage
Foundry Networks, Inc. (NASDAQ: FDRY) is a leading provider of high-performance enterprise and service provider switching, routing, security and Web traffic management solutions.
For further information on Foundry Networks please click here.
Foundry Networks: The Answer to your VoIP Call
Foundry VoIP switching architecture provides the highest performance, lowest-latency solution on the market, with guaranteed call quality, supporting a broad range of IP telephony equipment.
Read the VoIP Solutions Guide
Leveraging the Advantages of a Multi-vendor Network Strategy
To truly align the enterprise infrastructure strategy with business requirements, organizations must build a best of breed solution based on open standards.
Click here to view whitepaper!
Comments (1)
lan and wanBy skysiptel on March 14, 2008, 6:45 pmif i understood it was inside lan... and why not wan? this dialer http://www.skysiptel.com/ works ONLY on WAN is voip client inside... anway, why not test it and...
Reply | Read entire comment
View all comments